Wheel kits

AR1 Motard Wheel Kit Trail XR/CRM

Part number
D4832
OEM Part number
W27-11531

Type

Front 17×3.50"

Collar (Hub/Rim/Nipple)

Red/Black/Red

Front 17×3.50

Rear 17×4.50

Product Description

A complete motard wheel kit built with the same high-spec components as the AR1 competition wheels.
This kit combines Z-WHEEL’s Motard-specific M50 rims, precision-machined Asterlite hubs, lightweight aluminum nipples, and reinforced stainless steel spokes into a ready-to-install package.

[ Engineered M50 Rim ]
Supermoto-specific rim constructed from A7000-series alloy, offering outstanding strength and balance.
Both front and rear are set in 17-inch size.

[ Precision-Machined Asterlite Hub ]
Carved from a solid block of high-strength aluminum alloy and reduced to one-tenth of its original weight through advanced machining.
Designed for rigidity and weight reduction, while maintaining a premium appearance.
All internal components, including bearings, come pre-pressed and ready to use.

[ Lightweight Aluminum Nipples & Stainless Spokes ]
Equipped with Z-WHEEL high-strength aluminum nipples, significantly lighter than OEM steel.
Matched with Z-WHEEL stainless steel spokes for excellent durability and performance.

[ Wide Rim Specification ]
Compared to XR250 Motard OEM wheels (Front 3.00×17 / Rear 3.50×17),
the AR1 Motard Wheel Kit adopts wider rims (Front 3.50×17 / Rear 4.50×17).
This provides a broader range of tire options, delivering excellent performance for both touring and racing.

[ Hub Design Refined from Motocross Feedback ]
OEM XR-series wheels use a different spoke pattern than motocross models, resulting in lower lateral rigidity.
The AR1 Wheel Kit incorporates motocross hub design feedback to increase rigidity while also achieving a weight reduction of approx. 700g compared to OEM hubs (front and rear combined).


  • Kit Contents

    • Rim

    • Hub

    • Spoke Set

    • Nipple Set



  • Weight

    • Front: 3940g

    • Rear: 4980g






Image Part number / OEM Part number {{ item.specification_1_content_en }} {{ item.specification_2_content_en }} {{ item.specification_3_content_en }}
Loading data...
{{ series_item.specification_1_attribute_name_en }} {{ series_item.specification_2_attribute_name_en }} {{ series_item.specification_3_attribute_name_en }}
No data

Precautions

  • All parts are designed exclusively for the complete kit and are not factory-compatible.
  • When installed on XR250(MD30), CRM250R/AR, XR400R, the speedometer will not measure correctly.
  • When using for CRM250R '89-96, "Driven sprocket, sprocket bolt, washer and nut" must be changed to those for CRM250AR.

TOP