Led Fog Lights
- New part number
- F5961
- Old part number
- ZR47-0020
Recommended for adventure rides! Illuminate the mountain pass!
- Color
-
Black
F5961
Illumination image/Headlight LOW
Irradiation image/yellow LOW
Irradiation image/white HI
Irradiation image/yellow
Illumination image/white
Product Description
This LED projector fog light supplements the brightness of headlights on dark night roads and in mountainous areas, illuminating wide areas such as road shoulders and blind turns.Consumes 15W x 2 units of power to maintain sufficient brightness while considering the burden on the battery. Bolt-on installation with vehicle-specific design.
Features condensed into a compact unit include a cooling system, high beam and low beam switching, and dustproof and waterproof specifications.
- Fog light body x 2
- Stay x 1 each left and right
- Block x 1 each left and right
- Control unit x 2
- Switch x 1
- Power supply extraction harness x 1
- Red line x 1
- Black wire x 1
- Red line two-timing x 1
- M5 6mm button cap bolt x 4
- M6 15mm taper cap bolt x 2
- M5 10mm button cap bolt x 4
- 2.5mm, 3mm, 4mm hexagonal wrench x 1 each
- Tie Wrap x 10
Product Image
-
The high-brightness LED unit has a brightness of 1500 lumens and a power-saving specification of 15W per unit. The high beam (white)/low beam (yellow) can be switched with a switch at hand, making it possible to pass by oncoming vehicles. Comes with on/off switch.
-
The wide lateral light distribution enhances safety by illuminating dangerous road shoulders and corners that could not be seen with headlights alone. It also enables early detection of animals jumping out of bushes.
-
Bolt-on design for exclusive use with car models. Power harness included, no wiring modification required.
-
Compact design that does not destroy the silhouette of the vehicle.
-
An aluminum body is used for superior robustness and heat dissipation. Furthermore, a cooling fan operates at high temperatures to prevent damage to the unit and loss of brightness.
-
Low beam (yellow)/High beam (white) can be reversed by flipping the body. The highly flexible vehicle-specific mounts can be adjusted vertically and horizontally in the direction of illumination.
-
Dustproof and waterproof design that meets IP66. The lens is made of weather-resistant acrylic resin.
| Voltage | 12V/24V compatible |
|---|---|
| Power consumption | 15W/1 pc |
| Current | 1.4A |
| Color temperature | Yellow: 3000 Kelvin White: 6000 Kelvin |
| Brightness | Yellow: 1500 lumens White: 1500 lumens |
| weight | Approximately 120g/1 unit |
| size | 15W/1 pc |
| Power consumption | Approx. 38mm x 38mm x 53mm |
| material | Unit body: Aluminum alloy Installation stay: Stainless steel alloy |
No fitment list data.
