Triple clamp Top clamp

Triple Clamp Kit For CRF250L/M/Rally Only

New part number
F4557
Old part number
ZE14-1256

Inquire about our products

F4557

Product Description

The handlebar position can be moved forward and backward for fine-tuning to suit your physique, skill level, and riding style.

One-piece handlebar clamp improves rigidity for more direct handling.

The top clamp is machined from 7000 series extruded material for higher rigidity compared to the cast stock clamp.

The mounting direction of the lower fork clamp bolt has been changed to minimize fork deformation during installation, thus preventing suspension movement.

Meter/key cylinder stay integrally molded into the top clamp allows all bolt-on installation for superior fixing strength and security.

Lower clamps and stem shafts are made of aluminum instead of the factory steel, significantly reducing weight.

Exclusively for large-diameter bars (28.6mm). Side sticker included.



Standard bar (22.2mm) can be installed by purchasing optional clamps (upper + lower).

Kit includes: Top clamp, lower clamp, stem shaft, stem nut



Product Image

  • Up to 8 handlebar positions can be shifted forward and backward at a 5mm pitch. Fine adjustments can be made according to physique, skill level, riding style, etc. The front/rear adjustment range varies depending on the vehicle model.

  • One-piece type handlebar clamp is adopted. This dramatically improves rigidity and prevents twisting of the clamp when tipping over.

  • The thickness of each part and the height of the ribs have been changed. Even the smallest of details have been processed to reduce weight without sacrificing strength.
    In case of CRF250L/RALY'12-20 and CRM250M'13-17
    About -940g/30% lighter than the total weight of the stock product.

  • Fork clamp bolt mounting in the lateral direction reduces fork deformation and ZETA handguard mount side type, also facilitating the installation of the ZETA Handguard Mount.

  • The optional lower clamps allow the height of the bar mounts to be adjusted to a maximum of 32 different positions.

  • Fork clamp section has adequate thickness to increase fork fixing strength. The bolts are made of corrosion-resistant stainless steel.

  • The handlebar clamp is secured with four special bolts. Tightening the two bolts on the front side first and then tightening the bolts on the rear side allows for more secure fixation of the handlebar.

No fitment list data.

Maker Car model Model year New Product Number {{ item.main_item_specification_1_content_en }} {{ item.main_item_specification_2_content_en }} {{ item.main_item_specification_3_content_en }} {{ header.has_en ? header.title_en : header.title }}
Loading data...
{{ row && row.maker_name ? row.maker_name : '' }} {{ row && row.maker_car_base_name ? row.maker_car_base_name : '' }} {{ row && row.maker_car_base_year ? row.maker_car_base_year : '' }} 【NEW】

{{ row && row.product_code ? row.product_code : '' }} ※{{ row.product_code_note }}

{{ row && row.item.specification_1_attribute_name_en ? row.item.specification_1_attribute_name_en : '' }} {{ row && row.item.specification_2_attribute_name_en ? row.item.specification_2_attribute_name_en : '' }} {{ row && row.item.specification_3_attribute_name_en ? row.item.specification_3_attribute_name_en : '' }} {{ custom.has_en ? custom.name_en : custom.name }}
No data available

Annotation

Precautions

This product does not come with bearings that press fit into the stem shaft. If you purchase this product, please prepare bearings and main switch mount bolts (2 pieces) separately from the vehicle manufacturer's genuine parts. In addition, a special tool or press is required to install the bearing lower.

Related Products

TOP