Triple clamp Top clamp

Triple Clamp Kit 3mm Offset For WR250X Only

New part number
F4559
Old part number
ZE14-4253

Inquire about our products

F4559

Product Description

Offset clamps that bring the front forks closer to the steering axis to ensure the proper amount of trail.

Increases cornering stability and cornering speed. Exclusive for large-diameter bars (28.6mm).



Standard bar (22.2mm) can be installed with purchase of optional clamps (upper + lower).



Kit includes: Top clamp, lower clamp, stem shaft, stem nut

Product Image

  • Up to 8 handlebar positions can be shifted forward and backward at a 5mm pitch. Fine adjustments can be made according to physique, skill level, riding style, etc. The front/rear adjustment range varies depending on the vehicle model.

  • One-piece type handlebar clamp is adopted. This dramatically improves rigidity and prevents twisting of the clamp when tipping over.

  • The handlebar clamp is secured with four special bolts. Tightening the two bolts on the front side first and then tightening the bolts on the rear side allows for more secure fixation of the handlebar.

  • Ribs are placed in the right places to maintain strength, and high-precision wall cutting has been used to reduce weight while maintaining rigidity.

  • The optional lower clamps allow the height of the bar mounts to be adjusted to a maximum of 32 different positions.

  • Fork clamp section has adequate thickness to increase fork fixing strength. The bolts are made of corrosion-resistant stainless steel.

No fitment list data.

Maker Car model Model year New Product Number {{ item.main_item_specification_1_content_en }} {{ item.main_item_specification_2_content_en }} {{ item.main_item_specification_3_content_en }} {{ header.has_en ? header.title_en : header.title }}
Loading data...
{{ row && row.maker_name ? row.maker_name : '' }} {{ row && row.maker_car_base_name ? row.maker_car_base_name : '' }} {{ row && row.maker_car_base_year ? row.maker_car_base_year : '' }} 【NEW】

{{ row && row.product_code ? row.product_code : '' }} ※{{ row.product_code_note }}

{{ row && row.item.specification_1_attribute_name_en ? row.item.specification_1_attribute_name_en : '' }} {{ row && row.item.specification_2_attribute_name_en ? row.item.specification_2_attribute_name_en : '' }} {{ row && row.item.specification_3_attribute_name_en ? row.item.specification_3_attribute_name_en : '' }} {{ custom.has_en ? custom.name_en : custom.name }}
No data available

Annotation

Precautions

This product does not come with bearings that press fit into the stem shaft. If you purchase this product, please prepare bearings and main switch mount bolts (2 pieces) separately from the vehicle manufacturer's genuine parts. In addition, a special tool or press is required to install the bearing lower.

TOP