Handguard for on-road
ZETA Sonic Handguard PC KIT Smoke Universal
- New part number
- D3081
- Old part number
- ZS72-2200
Polycarbonate protector as standard with bar-end handguards
- Type
-
Universal
- Protector Collar
-
Smoke
F5634
Product Description
Stylish hand guard with polycarbonate (PC) protector as standard equipment.Polycarbonate (PC), which is resistant to impact, UV rays, low temperatures, and high temperatures, has a versatile, simple, and stylish design that can be used with any style of vehicle.
The hand guards are not only windproof, but also have the function of mitigating frontal impact.
Installation is as simple as fixing it to the handlebar end. No complicated work is required as with conventional hand guards, but the high-strength aluminum alloy bar-end plugs, which are machined to a high strength, hold the protector firmly in place.
The protector can be removed for use, or a ZETA protector of another design can be installed, allowing you to enjoy your favorite styling.[Design registration No. 1703538
- Knuckle guard: PU resin
- Arm: Forged aluminum
- Front plate: High-strength aluminum alloy
- Protector: Polycarbonate
- Attached bolt/nut: Stainless steel
- Plug adapter: High-strength aluminum alloy
- Bar-end plug: High-strength aluminum alloy
Product Image
[Universal type]
Can be installed on a hollow handlebars by removing the bar end plug.
- HONDA
- If an inner weight with a half-moon step is present in the mounting section, it can be installed by removing the inner weight and becoming hollow.
*CROSS CUB110'18-21 cannot be installed due to interference with the parking lever. - SUZUKI
- If there is an inner weight, it can be removed, and if it becomes hollow, it can be installed.
- Representative vehicle types
- CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR
[M16/M8 type]
Remove the bar end plug and check the handlebar end.
- YAMAHA
- The handlebar end can be attached to a handlebar with an M16 finish and a pitch of 1.5mm.
- KAWASAKI
- Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
- Representative vehicle types
- MT-07、XSR700, MT-09'14-20, XSR900, Z250, Z400, Z1000
[M6 type]
Remove the bar end plug and check the handlebar end.
- HONDA/HUSQVARNA
- Can be attached to a handlebar where an M6 nut is welded to the handlebar end.
- KAWASAKI
- Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
*Even vehicles with M6 type bar ends cannot be installed on bar ends that use Honda vehicles, where nuts will move. - Representative vehicle types
- MONKEY125, GROM, REBEL1100, SVARTPILEN 401'20-, VITPILEN 401'20-, SVARTPILEN 125'21-, SVARTPILEN 250'21-
| Maker | Car model | Model year | New Product Number | {{ item.main_item_specification_1_content_en }} | {{ item.main_item_specification_2_content_en }} | {{ item.main_item_specification_3_content_en }} | {{ header.has_en ? header.title_en : header.title }} |
|---|---|---|---|---|---|---|---|
| Loading data... | |||||||
| {{ row && row.maker_name ? row.maker_name : '' }} | {{ row && row.maker_car_base_name ? row.maker_car_base_name : '' }} | {{ row && row.maker_car_base_year ? row.maker_car_base_year : '' }} | 【NEW】 {{ row && row.product_code ? row.product_code : '' }} ※{{ row.product_code_note }} | {{ row && row.specification_1 ? row.specification_1 : '' }} | {{ row && row.specification_2 ? row.specification_2 : '' }} | {{ row && row.specification_3 ? row.specification_3 : '' }} | {{ custom.has_en ? custom.name_en : custom.name }} |
| No data available |
