Handguard for on-road

Sonic Handguard PC Kit

New part number
D3206
Old part number
ZS72-2502

Polycarbonate protector as standard with bar-end handguards

Type

Only For Grom Yes Monkey

Protector Collar

Light Smoke

View other product series

Inquire about our products

D3206

Product Description

Stylish hand guard with polycarbonate (PC) protector as standard equipment.

Polycarbonate (PC), which is resistant to impact, UV rays, low temperatures, and high temperatures, has a versatile, simple, and stylish design that can be used with any style of vehicle.

The hand guards are not only windproof, but also have the function of mitigating frontal impact.

Installation is as simple as fixing it to the handlebar end. No complicated work is required as with conventional hand guards, but the high-strength aluminum alloy bar-end plugs, which are machined to a high strength, hold the protector firmly in place.

The protector can be removed for use, or a ZETA protector of another design can be installed, allowing you to enjoy your favorite styling.[Design registration No. 1703538
    raw materials
    • Knuckle guard: PU resin
    • Arm: Forged aluminum
    • Front plate: High-strength aluminum alloy
    • Protector: Polycarbonate
    • Attached bolt/nut: Stainless steel
    • Plug adapter: High-strength aluminum alloy
    • Bar-end plug: High-strength aluminum alloy

Product Image

  • By loosening the arm bolts, the angle can be adjusted steplessly up and down around the bar ends.

  • The special spacer allows for position adjustment from the center position by 5 degrees per step, 4 steps up and 4 steps down, for a total of 9 steps. It is easy to adjust to the desired styling.

  • A groove in the bar-end plug allows the arm position to be adjusted to two positions to suit the vehicle. It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.

  • The knuckle guard is made of soft and flexible PU resin. It mitigates impact from the front and prevents damage to the guard itself.

  • Two design options are available by attaching and detaching the front plate with laser-printed logo.

  • Removable polycarbonate protectors are standard.

  • Can be fitted with ZETA XC Protector Series. A wide range of styling can be enjoyed.

    [Attachable protectors]
    - ZETA X3 Protector
    - ZETA X2 Protector
    - ZETA XC Protector
    - ZETA XC-PRO Protector

  • Universal type attached bar-end plug
    Double slide anchor system for easy installation and strong attachment at the same time.
    Includes anchors for steel handlebars (inner diameter 17.5mm-18.5mm) and aluminum handlebars (inner diameter 13.5mm-14.5mm). Can be attached to a wide range of vehicles.

  • M16/M8 type attached bar end plug
    Compatible with M16 and M8 type handlebar ends.

  • M6 type attached bar end plug
    Compatible with M6 type handlebar ends.

[Universal type]

Can be installed on a hollow handlebars by removing the bar end plug.

HONDA
If an inner weight with a half-moon step is present in the mounting section, it can be installed by removing the inner weight and becoming hollow.
*CROSS CUB110'18-21 cannot be installed due to interference with the parking lever.
SUZUKI
If there is an inner weight, it can be removed, and if it becomes hollow, it can be installed.
Representative vehicle types
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR

[M16/M8 type]

Remove the bar end plug and check the handlebar end.

YAMAHA
The handlebar end can be attached to a handlebar with an M16 finish and a pitch of 1.5mm.
KAWASAKI
Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
Representative vehicle types
MT-07、XSR700, MT-09'14-20, XSR900, Z250, Z400, Z1000

[M6 type]

Remove the bar end plug and check the handlebar end.

HONDA/HUSQVARNA
Can be attached to a handlebar where an M6 nut is welded to the handlebar end.
KAWASAKI
Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
*Even vehicles with M6 type bar ends cannot be installed on bar ends that use Honda vehicles, where nuts will move.
Representative vehicle types
MONKEY125, GROM, REBEL1100, SVARTPILEN 401'20-, VITPILEN 401'20-, SVARTPILEN 125'21-, SVARTPILEN 250'21-

No fitment list data.

Maker Car model Model year New Product Number {{ item.main_item_specification_1_content_en }} {{ item.main_item_specification_2_content_en }} {{ item.main_item_specification_3_content_en }} {{ header.has_en ? header.title_en : header.title }}
Loading data...
{{ row && row.maker_name ? row.maker_name : '' }} {{ row && row.maker_car_base_name ? row.maker_car_base_name : '' }} {{ row && row.maker_car_base_year ? row.maker_car_base_year : '' }} 【NEW】

{{ row && row.product_code ? row.product_code : '' }} ※{{ row.product_code_note }}

{{ row && row.item.specification_1_attribute_name_en ? row.item.specification_1_attribute_name_en : '' }} {{ row && row.item.specification_2_attribute_name_en ? row.item.specification_2_attribute_name_en : '' }} {{ row && row.item.specification_3_attribute_name_en ? row.item.specification_3_attribute_name_en : '' }} {{ custom.has_en ? custom.name_en : custom.name }}
No data available

Annotation

Image New number {{ item.specification_1_content_en }} {{ item.specification_2_content_en }} {{ item.specification_3_content_en }}
Loading data...
{{ series_item.specification_1_attribute_name_en }} {{ series_item.specification_2_attribute_name_en }} {{ series_item.specification_3_attribute_name_en }}
No data

TOP