Sonic Handguard
- Selected car
- SUZUKI V-STROM250SX 2023 8BK-EL11L
- New part number
- F5630
- Old part number
- ZS72-2002
Easy to install looks great on any bike stylish handguards to the next level!
- Color
-
Black
- Type
-
M6 Type
F5630
Product Description
Stylish hand guards that can be styled to fit a variety of bikes.Simply fix it to the handlebar end. Firmly secured in place without the complexity of conventional hand guards.
High-strength aluminum alloy bar ends protect grips and throttle tube from unexpected falls.
The high-grade matte black finish of the body is complemented by a laser-printed logo mark on the front plate, which can be attached or detached, and the same series ofOptional PC ProtectorThe ZETA protector of other designs can also be attached. This handguard allows you to freely change the image of its appearance and enjoy your favorite styling.[Design registration No. 1703538
- Knuckle guard: PU resin
- Arm: Forged aluminum
- Front plate: High-strength aluminum alloy
- Attached bolt/nut: Stainless steel
- Plug adapter: steel
- Bar-end plugs: High-strength aluminum
Product Image
-
By loosening the arm bolts, the angle can be adjusted steplessly up and down around the bar ends.
-
The special spacer allows for position adjustment from the center position by 5 degrees per step, 4 steps up and 4 steps down, for a total of 9 steps. It is easy to adjust to the desired styling.
-
A groove in the bar-end plug allows the arm position to be adjusted to two positions to suit the vehicle. It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
-
The knuckle guard is made of soft and flexible PU resin. It mitigates impact from the front and prevents damage to the guard itself.
-
Two design options are available by attaching and detaching the front plate with laser-printed logo.
-
Can be fitted with ZETA XC Protector Series. A wide range of styling can be enjoyed.
[Attachable protectors]
- ZETA X3 Protector
- ZETA X2 Protector
- ZETA XC Protector
- ZETA XC-PRO Protector -
Universal type attached bar-end plug
Double slide anchor system for easy installation and strong attachment at the same time.
Includes anchors for steel handlebars (inner diameter 17.5mm-18.5mm) and aluminum handlebars (inner diameter 13.5mm-14.5mm). Can be attached to a wide range of vehicles. -
M16/M8 type attached bar end plug
Compatible with M16 and M8 type handlebar ends. -
M6 type attached bar end plug
Compatible with M6 type handlebar ends.
[Universal type]
Can be installed on a hollow handlebars by removing the bar end plug.
- HONDA
- If an inner weight with a half-moon step is present in the mounting section, it can be installed by removing the inner weight and becoming hollow.
*CROSS CUB110'18-21 cannot be installed due to interference with the parking lever. - SUZUKI
- If there is an inner weight, it can be removed, and if it becomes hollow, it can be installed.
- Representative vehicle types
- CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR
[M16/M8 type]
Remove the bar end plug and check the handlebar end.
- YAMAHA
- The handlebar end can be attached to a handlebar with an M16 finish and a pitch of 1.5mm.
- KAWASAKI
- Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
- Representative vehicle types
- MT-07、XSR700, MT-09'14-20, XSR900, Z250, Z400, Z1000
[M6 type]
Remove the bar end plug and check the handlebar end.
- HONDA/HUSQVARNA
- Can be attached to a handlebar where an M6 nut is welded to the handlebar end.
- KAWASAKI
- Can be attached to a handlebar where the M8 nut is welded to the handlebar end.
*Even vehicles with M6 type bar ends cannot be installed on bar ends that use Honda vehicles, where nuts will move. - Representative vehicle types
- MONKEY125, GROM, REBEL1100, SVARTPILEN 401'20-, VITPILEN 401'20-, SVARTPILEN 125'21-, SVARTPILEN 250'21-
Selected car：SUZUKI V-STROM250SX 2023 8BK-EL11L
No fitment list data.
